Product family Peripherals
Flexibly scalable - onboard and remote
All INSEVIS peripheral modules can be used onboard (in the 3, 7 or 11 free peripheral slots of the INSEVIS PLCs) and as an extension also decentrally (in the peripheral slots of the head stations / peripheral blocks). With ConfigStage, the peripheral modules are configured via drag and drop, e.g. whether a bit is operated as an input or output, an analog channel should be an input or output with current or voltage or whether 2, 3 or 4 sensors are used.
All modules can be labeled according to customer specifications.
Applications with peripheral modules
The robust roadheaders make it quite easy to widen tunnels. Wikipedia says that in the 1960s these were modified tank chassis to which a boom with milling heads was mounted. The basic principle has not changed. The load underground is high, the entire layer is dusty and shakes...
Germany is envied for its inventors. And they are not only found in the "country" but also in the "far north", where this video was recorded. Employees of Hanse-SCADA GmbH have developed and manufactured a special machine for optoelectronic leak testing of syringes. The following production steps are processed fully automatically in the system...
For all those who are now thinking about PowerQuality; no, this time it is not transients and harmonics that are distorting the sine wave, this is a different issue... Kämmer Antriebstechnik was tasked with implementing PQ control for a test machine hydraulics using an S7 controller...
In process engineering, when transporting flammable bulk material, it must be ensured that the critical mass is not exceeded. This could happen due to conveyor system failures. To prevent this, two INSEVIS-S7 compact controllers are used...
Home > Products > Peripherals > Head assemblies
Order number
Designation
DP301C-02
Decentralised peripheral block with fixed I/Os
The easiest way for decentralized expansion
Decentralised peripherals with 12 digital inputs or outputs, 12 counting inputs, 3 analogue channels, each of which can be configured individually as an input or output and for current or voltage and another 3 analogue inputs, as an ultra-compact block, top equipment in the smallest installation space, just as you would expect from INSEVIS. Absolutely easy to set up S7 peripherals via. Connected via CAN, no CAN knowledge required for configuration. Set the node number on 2 rotary switches of the head station and enter this number in the ConfigStage, done. Entry of the start addresses and then automatic address assignment by the software including plausibility test and overview of the address data of the individual I/Os. In a robust metal housing with customer logo for the 35 mm top-hat rail on request.
Home > Products > Peripherals > Head assemblies
Order number
Designation
DP301C-02
Decentralised peripheral block with fixed I/Os
The easiest way for decentralized expansion
Decentralised peripherals with 12 digital inputs or outputs, 12 counting inputs, 3 analogue channels, each of which can be configured individually as an input or output and for current or voltage and another 3 analogue inputs, as an ultra-compact block, top equipment in the smallest installation space, just as you would expect from INSEVIS. Absolutely easy to set up S7 peripherals via. Connected via CAN, no CAN knowledge required for configuration. Set the node number on 2 rotary switches of the head station and enter this number in the ConfigStage, done. Entry of the start addresses and then automatic address assignment by the software including plausibility test and overview of the address data of the individual I/Os. In a robust metal housing with customer logo for the 35 mm top-hat rail on request.